Direct Sales
Product ID: 97108
Perkins 1104D-44T 4.4lt 94hp Diesel
Aquatic Weed Harvester
2012
Very Good
£P.O.A
Subject to UK VAT unless sold outside of the EU
1
Berky 6530 Aquatic weed harvester, direct from use with UK Government department (environment agency)
Weed harvesters cut and collect weed and trash in a single operation, storing large volumes of debris until it can be emptied in a suitable location. Highly efficient, low noise with excellent stability and visibility, whilst being comfortable and safe to use for the operator.
Berkenheger Weed Harvesters have become a world-renowned machinery range, offering highly versatile and powerful machinery to cut and collect aquatic weed, along with other floating debris.
The machines simultaneously cut weed below the water line, and lift it onto the boat using a pair of conveyors. On its way onto the hopper conveyor, the weed is allowed to drain, reducing weight and allowing a much higher capacity to be stored. To empty the Weed Harvester, it is simply moored close to the bank, with the front conveyor raised before reversing the conveyors to place the cuttings in a tidy pile.
Engine: 4 cylinder Perkins 1104D-44T 4400cc 94hp Diesel
Diesel Tank: 2 x 150lt capacity
Hull: Sandblasted navy sheet with primer and topcoat with waterproof coating.
Traction Drive: Fully hydraulic, infinitely variable speed, forwards 0-8km/h, backwards 0-3km/h by 2 hydraulic balanced throttles
Mode of drive: 2 x slewable, coiling free drive worms, independently operating with height and depth adjustment and hydraulically folding out of the water.
Steering: Hydraulic steering by lateral steering of both driving worms
Drivers cab: Hydraulically lowerable high visibility cab, with convertible roof/escape hatch. Lockable sliding access door, anti vandal covers, heating and fans with clear concise control elements.
Front implement: Collecting conveyor 4.30m long, 2.00m wide, with infinitely variable speed in forward/backward direction. Hydraulically adjustable height and depth adjustment (max depth 1.80m - max discharge height 2.00m.
U-Cutting unit: Hydraulically operated, with a horizontal cutting width of 2.30m and vertical length of 1.50m
Additional equipment: Blockland cooling system for coolant and hydraulic oil, echo sounder, bow thruster, water intake probes, bilge pump, navigation lights & signal horn.
Dimensions:
Overall Length: 11.00m
Hull Length: 8.50m
Width: 3.20m
Height: 0.90m/1.10m
Draught: approx. 48cm unladen 75cm fully laden
Mowing depth up to 1.50m
Unladen weight: 10,000kg
Payload: 7.5m3 (4t)
Further pictures and video of operation available on request,
Our stock reference W12922
***
